1. Dual AMD EPYCTM 7000-Series Processors
2. 2TB Registered ECC DDR4
2666MHz SDRAM in 16 DIMMs
3. Expansion slots:
2 PCI-E 3.0 x16
3 PCI-E 3.0 x8
4. 10 SATA3, 1 M.2, 2 SATA DOM
5. Dual Gigabit Ethernet LAN Ports
6. ASPEED AST2500 BMC graphics
7. Up to 2 USB 3.0 ports
Up to 4 USB 2.0 ports
8. 8 4-pin PWM Fan & Speed control
Physical Stats
Form Factor:E-ATX
Dimensions:12" x 13.05" (30.5cm x 33.1cm)
Processor/Chipset
CPU:Dual AMD EPYCTM 7000-series Processors
Socket SP3
Cores:Up to 32 Cores
Chipset:System on Chip
System Memory
Memory Capacity:16 DIMM sockets
Supports up to 2TB Registered ECC DDR4 2666MHz SDRAM in 16 DIMMs
8-channel memory bus
For Dual CPUs: Recommended that memory be populated equally in adjacent memory banks
See Detailed Memory Support Matrix
Memory Type:DDR4 2666 MHz Registered ECC, 288-pin gold-plated DIMMs
DIMM: Sizes8GB, 16GB, 32GB, 64GB, 128GB
Memory Voltage:1.2V
Error Detection:Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
SATA:SATA3 (6 Gbps)
IPMI:Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN and KVM-over-LAN support
ASPEED AST2500 BMC
Network Controllers:2 1GbE LAN via Intel i350-AM21
1 Realtek RTL8211E PHY (dedicated IPMI)
VGA:ASPEED AST2500 BMC
Input / Output
SATA:10 SATA3 (6 Gbps) ports
LAN:2 RJ45 Gigabit Ethernet LAN ports
1 RJ45 Dedicated IPMI LAN port
USB:2 USB 3.0 ports (rear)
4 USB 2.0 ports (2 rear + 2 via header)
VGA:1 VGA port
Others:1 COM port (rear)
2 SATA DOM power connector
1 TPM 2.0 header
Expansion Slots
PCI-Express:3 PCI-E 3.0 x8
2 PCI-E 3.0 x16
M.2:Interface: PCI-E 3.0 x2
Form factor: 22110
Support SATA devices
Chassis ( Optimized for H11DSi )
2U Chassis:CSE-213AC-R1K23LPB
CSE-216BE1C4-R1K23LPB
CSE-826BE1C4-R1K23LPB
CSE-829HE1C4-R1K62LPB
3U Chassis:CSE-836BE1C-R1K23B
4U Chassis:CSE-745BAC-R1K28B2
System BIOS
BIOS Type:AMI 128Mb SPI Flash EEPROM
BIOS Features:Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 5.1
USB Keyboard Support
SMBIOS 3.1.1
Management
Software:Super Doctor 5
Watch Dog
NMI
SPM
SUM
IPMI 2.0, KVM with dedicated LAN
Power Configurations:ACPI Power Management
Power-on mode control for AC power loss recovery
PC Health Monitoring
CPU:Monitors CPU Core Voltages, +1.5V, +1.8V, +12V +5V, +5V standby
CPU switching voltage regulator
Supports system management utility
VBAT
FAN:Up to 8-fan status tachometer monitoring
Up to eight 4-pin fan headers
Dual Cooling Zone
Status monitor for speed control
Pulse Width Modulated (PWM) fan connectors
Temperature:Monitoring for CPU and chassis environment
CPU Thermal Trip Support
Thermal control for 8x Fan connectors
I2C Temperature Sensing Logic
LED:CPU / System Overheat LED
Other Features:Chassis Intrusion Detection
Chassis Intrusion Header
UID
Operating Environment / Compliance
Environmental Specifications:Operating Temperature:10oC to 35oC (50oF to 95oF)
Non-operating Temperature: -40oC to 70oC (-40oF to 158oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
Item Dimension (L inchxW inchxH inch)
NA
Weight
5.00lb
Warranty Information
1 Year
